Universal Draglink Kit, Ford 2005+ Super Duty Axle, with Heim Joint

This is a Universal "Weld Together" Draglink kit to help you install your 2005 and newer Ford Super Duty front axle in just about anything!

This kit is designed to work with the factory Ford lower draglink end and factory Ford tie-rod. You will need to make sure your axle still has these factory components on it, or purchase them separately from your local parts house.

This kit comes with:

• One left hand thread 7/8" x 7/8" heim joint (of your choice)*
• 7/8"x3/4" high misalignment spacers for the pitman arm
• Both upper and lower hex shape weld-in tube inserts
• Jam nuts

The upper tube insert is 7/8" x 14 Left hand thread and the lower is 1" x 16 Right hand thread. The tubing is a 3 foot tube of 1 3/4"x.250" wall DOM tubing.

*You can choose either a standard Chromoly heim joint or a FK heim joint.

Warning! The bolt size for the upper heim joint and spacers is 3/4". You will need to drill you pitman arm to a 3/4" through hole.