Dana 44 Stud/Nut/Cone Kit

If you're doing cross-over or full high steer on a Dana 44 axle and didn't buy one of our kits that includes the hardware, then this is what you're going to need.  

• The standard kit (WFO 1250) will fit any of our steering arms with a 1/2" spacer or less.
• If you're using a 1" or taller spacer you need to use our Tall Dana 44 studs - WFO 1250T.
• These are sold in a set of three.
• Standard height studs are 3" tall and the Tall Studs are 4" tall