JT Rear Upper or Lower Mid Arm Rebuild Kit

Rebuild kit for:

• WFO 4112 - 2019+ Jeep JT Gladiator Rear Adjustable Lower Links
• WFO 4113 - 2019+ Jeep JT Gladiator Rear Adjustable Upper Links

This kit can be used to rebuild either the WFO 4112 Lower Links or WFO 4113 Upper Links.  The same kit is used for both sets of links.

Rebuild your rear links by replacing the Duroflex bushings.

Remove the c-clip and press the old bushings and washers out.  Grease the new bushings and re-install using the original c-clip and washers.

One kit includes the required bushings to rebuild EITHER the pair of rear lower links OR the pair of rear upper links. To rebuild both the lower links and the upper links, you will need two kits.

Kit includes:

(4) Duroflex 7376 Bushings  (2-5/8” wide with 5/8” bolt hole at frame & axle)

(4) Small packet of synthetic grease with PTFE