Jeep CJ Outboard Shackle Hanger Kit for 31.5" Springs

This is our CJ full width outside the frame Shackle Hanger Kit for the rear of the front axle. This kit only works with axles with a center perch width of 31.5". Common axles would be a '77-'91 GM Dana 60 or '71-'76 GM Dana 44. This kit is designed to work with BDS (PN#004200), 2.5" wide leaf springs with our CJ Front Shackle Reversal.

Includes:
- Under the frame fabricated plates
- Shackle hangers for the leaf springs, to be welded onto the frame mounts, with Large 1.5" bushings and 9/16" sleeves
- Four 5" zinc plated shackles with a crossbar sleeve and hardware
- Four grade 8 9/16" bolts to mount the shackles to the frame hanger and to the leaf springs 

Welding required. 

Only to be used with an axle that has a center perch width of 31.5". 

This is the shackle reversal we recommend using with this shackle hanger kit:  WFO FBD-CJ-315

This Kit includes:
WFO SH-CJ-315 - Jeep Outboard Shackle Hanger Mount, for 31.5" Springs (Qty: 2)
WFO 206A - Shackle Hanger for 2.5" Wide Spring (Qty: 2)
DAYM02153BK - YJ Large Bushing, 1.5" OD, 3/4" ID (Qty: 4)
WFO 4261 - 3/4" Bushing Sleeve, 9/16" Bolt, Zinc Coated (Qty: 2)