05+ FSD Axle, Clevis End Pieces ONLY, Radius Arm Setup, NON WELDED

Unwelded Clevis Ends to create a Radius Arm set up on a Ford Super Duty '05+ Axle. Use these Clevis ends to build your own axle links. These brackets mount to the factory radius arm locations for the upper and lower mounts on the '05+ axle.

We recommend the Radius Arm setup for anyone running less than 8” of lift.

This kit comes with enough pieces to build 4 clevis ends for your upper and lower links. You will need to provide your own DOM. The upper clevis ends are designed for 1-3/4" DOM and the lower clevis ends are designed for 2" DOM. Each bracket is laser cut out of 1/4" plate. Our brackets are 4 sided for extra rigidity. One end of the DOM tube is designed to slightly push through the brackets so it can be welded on the inside of the brackets before final assembly.

These ship as raw metal and come UNWELDED!

MADE IN THE USA!

Instructions can be found under the Instructions tab above.