Chevy 88-98 3/4T 31.5" Wide, SAS

This is a custom front leaf spring hanger (box drop) for a straight axle swap. It fits 1988-1998 Chevy 3/4 ton trucks and It also fits 1992 to 1998 3/4 ton Suburbans. It welds directly to the factory frame rails. 

It is set up for a leaf spring width of 31.5" center to center. The leaf spring hangers are 3" wide which gives you room for a 2.5" leaf spring plus bushings. 

This is a very strong leaf spring hanger. It's the perfect location for you to weld on two, WFO Clevis tabs for winching points. As a bonus, we have welded on two 3/8" spacers to the top of the hanger which drops it down just enough so a Warn M Series winch will bolt onto the top of it and still work with the stock radiator core support. The holes are slotted on the top of the hanger so it will fit the different frame variations.

On most of the '88-'98 SAS projects we have done in our shop, we use 52" or 56" Chevy rear leaf springs in the front of the truck.

We recommend welding this onto the frame!

MADE IN THE USA!

This front box drop requires many other parts to finish your Straight axle swap! Welding Required!