Tie Rod Kit w/ 7/8" Heim Joints w/ 3/4" Bore

WFO TR7834-KIT - Tierod Kit - This is a great kit for those rigs that plan to use heim joints for tie rod ends. If you're not already using heim joints, you'll need to drill out the tapered holes to 3/4". HAVE NO FEAR! If for some reason you decide that you want to switch back to tie rod ends, we have an insert that's tapered on the inside and a 7/8" straight bore on the outside.

The kit has enough tubing to accommodate any automotive axle. You will need to cut the tube to length, weld in the tube inserts, and set the toe (we recommend 1/8" toe in). We include 1/4" thick spacers to prevent binding that can be created by steering arms (full high steer application only). If you have questions regarding where to cut the tube, or how to set the toe, feel free to give us a call!

The kit includes:

• 4.5' Of 1.5"x.250" DOM
• Weld In Tube Inserts
• Left & Right Hand 7/8" Rod Ends w/ 3/4" Bore
• 2 1/4" Thick Misalignment Washers & Jam Nuts

Welding required.

This Kit includes:
DOM 1.5"x.250"-4.5 Feet: DOM 1.5"x.250" (1.0" I.D.) -4.5 Feet (Qty: 1)
WFO 1873-L: 7/8"-14 LH Threaded Tube Insert, 1" I.D. Tube (Qty: 1)
WFO 1873-R: 7/8"-14 RH Threaded Tube Insert, 1" I.D. Tube (Qty: 1)
XML12-14: 7/8" x 3/4" LH Male Heim Joint (Qty: 1)
XMR12-14: 7/8" x 3/4" RH Male Heim Joint (Qty: 1)
WFO 7814-L: 7/8"-14 Jam Nut, Left Hand - 7/8"-14 Jam Nut, Left Hand (Qty: 1)
WFO 7814-R: 7/8"-14 Jam Nut, Right Hand - 7/8"-14 Jam Nut, Right Hand (Qty: 1)
WFO 750-25: 3/4" x 1/4" Heim Spacer - 3/4x.250 Straight Spacer with Tapered End (Qty: 2)