GM HD 2000-2010 6" SAS Kit Pitman Arm

This is the pitman arm we use in our 6" 2000-2010 GM HD Straight Axle Swap Kit.

It has been machined with a Chevy Drag Link Taper hole from the bottom up and has no master splines so it will work properly on the GM HD box.

The drop is 1-3/4"

The Hole to Hole measurement is approximately 6.5"

The taper in this pitman arm will also accept the stock 2005+ Ford factory draglink end. This allows it to be used with factory Ford steering linkage.

NOTE: Because it does not have master splines, you will need to center your steering box before installing pitman arm.