Truss Upper Link Mount For 3/4" & 7/8" Heim Joints
WFO 1920. Truss Upper Link Mount for 7/8" heims or 3/4" heims. - This is a "bat wing" style link mount designed to be incorporated with an axle truss. They are laser cut from 1/4" steel plate. We typically use 7/8" heim joints with high misalignment spacers (5/8" through hole), but if you want to use 3/4" they will work with those too. Check out the related items below to set it up. These are sold unfinished (bare steel) and welded together. Heim joints are not included and must be purchased separately.
Link mount width - 1.75"
Link mount height - 2.5"
Bolt size - 5/8"
Overall height - 3"
Overall width - 9"
40 degrees of separation
The truss link mount is designed to mount on the truss to minimize height above the axle. Note the picture at the top to see the biggest difference between the truss link mount and the cross member link mount. Note that the HD truss link mount is not available in a cross member link mount HD version.
WARNING: Heim joints not included!
Item added to your shopping cart.
Item added to your wishlist.